

language 

中国

韩国



Homepage

News

Technical support

News

Check category



2021-06-01

Basic knowledge of computer embroidery machine installation, debugging and maintenance

1. After the embroidery machine is in place, adjust the basic level, and fix and implement the four foot screws. The whole machine is stable and cannot be floated. 2. Tighten the mounting screws of the wire rack and not float to avoid resonance. 3. Check the external power supply. For the 380V power supply, check whether the neutral wire is in place and the ground wire is grounded.

2021-06-01

Baolun Company reminds customers: Precautions for purchasing second-hand embroidery machines

Thread breakage rate, needle breakage rate: According to the request of your own embroidery, the thread breakage rate of the second-hand embroidery machine must first be looked at. Broken needle ratio, the less the better. In fact, the problem of embroidery machines has been fundamentally solved after so many years of development.

2021-06-01

How to use embroidery needles correctly

Embroidery is a key factor for embroidery. If the wrong needle is selected, it will cause the thread or the needle to break. This will not only waste resources, but also need to spend extra manpower to thread the needle and make up the thread. The type of rusty needles is usually divided into DB*K5 (R) NY# 6# 14 needles. The smaller the number of needles, the smaller the pinhole. However, general flat rust uses #11 needles on thin materials.

2021-06-01

Special embroidery process

Taer Temple pile embroidery: also known as'pad embroidery'. According to the shape of the artwork of different products, first use wool or cotton as a base, cover with various colors of silk and satin, and then embroider according to the picture, and some add partial depiction. The work drawn in this way has exquisite and embossed patterns, three-dimensional impression, and the effect is similar to relief. .