language
中国
韩国
韩国
韩国
韩国
韩国
soso
/
/
/
Chenille embroidery machine introduces the thread breakage handling knowledge of embroidery machine

Chenille embroidery machine introduces the thread breakage handling knowledge of embroidery machine

  • Categories:Industry Trends
  • Author:
  • Origin:
  • Time of issue:2021-10-18 11:24
  • Views:

(Summary description)Look at the depth of the needle and whether the hook is running, pay attention to turn the machine to 196 degrees, open the needle plate, press down the needle, and look at the position. The lower end of the needle hole needs to be about 1.5 to 2 mm below the tip of the hook In addition, the tip of the hook needs to be in a straight line with the needle, and the back plane of the needle and the tip of the hook must be at a distance of one strand of hair. If not, these requirements need to be met.

Chenille embroidery machine introduces the thread breakage handling knowledge of embroidery machine

(Summary description)Look at the depth of the needle and whether the hook is running, pay attention to turn the machine to 196 degrees, open the needle plate, press down the needle, and look at the position. The lower end of the needle hole needs to be about 1.5 to 2 mm below the tip of the hook In addition, the tip of the hook needs to be in a straight line with the needle, and the back plane of the needle and the tip of the hook must be at a distance of one strand of hair. If not, these requirements need to be met.

  • Categories:Industry Trends
  • Author:
  • Origin:
  • Time of issue:2021-10-18 11:24
  • Views:
Information

How to deal with the broken thread of embroidery machine? Follow the editor of Chenille embroidery machine to have a simple understanding!
1. First touch the hook with your hands, if there are any burrs, change them if there are any.
2. Look at the depth of the needle and whether the hook is running, pay attention to turn the machine to 196 degrees, open the needle plate, press down the needle, and look at the position. The lower end of the needle hole needs to be 1.5 to 2 below the tip of the hook. For a distance of about millimeters, the tip of the hook needs to be in a straight line with the needle, and the back plane of the needle and the tip of the hook must maintain a distance of one strand of hair. If not, these requirements need to be met.


3. See if there are burrs in the needle plate, and sandpaper is needed.
4. Change the needle bar and needle.
5. If none of the above methods have been tried, just press down the needle, grasp the needle clamp with your hand, and move it up and down. If the gap exceeds 3 mm, replace the slider, driver, aluminum connecting rod, and small connecting rod. Inject butter into the Dalian rod to reduce the gap. Grasp the jumper wire A with your hand, and swing it up and down around 250 degrees to see if the gap between the cam and the 7.94 ball falls off.
6. None of the above tried, then the machine turned to 172 degrees, fixed the main shaft, can not let him move the specific way to think about it, and then loosen the eccentric chuck on the main shaft on the right side of the machine head. If you hold the eccentric cam with your hand, it is a 4-piece set of rotation. You need to turn left and right to find a movement track. At the lowest end of the movement track, tighten the chuck. If you feel bad and have poor eyesight, you can use a watch. Generally, if there is no table, one head is not a big problem.
The above is the introduction of Chenille embroidery machine editor: the knowledge of handling broken thread of embroidery machine.

Keyword:

More information

Computerized embroidery machine, including a body, a working part, a power box, an embroidery arm and an embroidery frame; the body is provided with a support plate, a vertical rod, a splitter frame, a splitter board, a computer stand and a tablet computer; Embroidery thread channels and needles;
Including the fuselage, the working part, the power box, the embroidery arm and the embroidery frame, the fuselage is provided with a support plate, a vertical rod, a threading frame, a threading board, a computer stand and a tablet computer, and the working part is provided with an embroidery thread channel and Needle; the embroidery frame includes a pair of embroidery rollers that rotate synchronously under the drive of a servo motor, and a retaining ring is installed on the embroidery rollers.
The bean stitch is a stitch that goes back and forth in the other chosen direction, and then a stitch goes over itself directly back to its starting point. The more needles, the stronger the three-dimensional effect. In the design, they are often connected together to form various patterns to create various embroidery effects.
Best computerized embroidery machine has liquid crystal display function: the liquid crystal display of this type of machine is generally of relatively high resolution, and the status of the pattern can be displayed on it at any time during embroidery, and it can be switched according to the actual situation. The English interface is very simple to operate.

Copyright© 2021  CHINA BAOLUN  All rights reserved   粤ICP备20022022号    Powered by www.300.cn

Copyright© 2021  CHINA BAOLUN All rights reserved

粤ICP备20022022号    Powered by www.300.cn

搜索
Search