language
中国
韩国
韩国
韩国
韩国
韩国
soso
News
/
/
Chenille embroidery machine

News

Check category
Chenille embroidery machine introduces the thread breakage handling knowledge of embroidery machine
2021-10-18

Chenille embroidery machine introduces the thread breakage handling knowledge of embroidery machine

Look at the depth of the needle and whether the hook is running, pay attention to turn the machine to 196 degrees, open the needle plate, press down the needle, and look at the position. The lower end of the needle hole needs to be about 1.5 to 2 mm below the tip of the hook In addition, the tip of the hook needs to be in a straight line with the needle, and the back plane of the needle and the tip of the hook must be at a distance of one strand of hair. If not, these requirements need to be met.
See more
Chenille embroidery machine tells the relevant knowledge when the computer embroidery machine encounters a failure
2021-10-11

Chenille embroidery machine tells the relevant knowledge when the computer embroidery machine encounters a failure

When the computerized embroidery machine encounters a failure, the general approach is to replace the control board, that is, send the faulty control board to the manufacturer or the sales department, and then send it back after repair. It takes a lot of time to come and go, which brings a lot to the company. The inconvenience may affect production in severe cases.
See more
Cheapest Chenille embroidery machine tells how to clean the floppy disk drive on the embroidery machine
2021-09-29

Cheapest Chenille embroidery machine tells how to clean the floppy disk drive on the embroidery machine

After the floppy disk drive on the embroidery machine is used for a period of time, the head will be stained with dirt. The reason is mostly due to the dust in the air and the worn magnets on the floppy disk sticking to the head; or the floppy disk used is of poor quality, damp, Causes such as mildew.
See more
Cheapest Chenille embroidery machine tells the knowledge of the electrical principle of the embroidery machine
2021-09-27

Cheapest Chenille embroidery machine tells the knowledge of the electrical principle of the embroidery machine

First use embroidery CAD software to make a pattern. After generating the pattern, put the disks containing the embroidery program and the pattern into the computer disk drive respectively. Under the control of the program, the computer will change the pattern coordinate value to the X and Y directions of the stretch frame. The electric signal with the equivalent displacement is sent to the X, Y, Z single-chip microcomputer system for motor speed up and down processing, and then outputs the three-phase six-time signature. The power amplifier box of the line motor performs power amplification, and the red X, Y stepping motor drives it. The stretch frame completes the feed movement between X and Y; at the same time, it drives the Z stepping motor to drive the needle to move up and down, so that the embroidery can go on continuously.
See more
Previous
1

Copyright© 2021  CHINA BAOLUN  All rights reserved   粤ICP备20022022号    Powered by www.300.cn

Copyright© 2021  CHINA BAOLUN All rights reserved

粤ICP备20022022号    Powered by www.300.cn

搜索
Search