language
中国
韩国
韩国
韩国
韩国
韩国
soso
/
/
/
Basic knowledge of computer embroidery machine installation, debugging and maintenance

Basic knowledge of computer embroidery machine installation, debugging and maintenance

(Summary description)1. After the embroidery machine is in place, adjust the basic level, and fix and implement the four foot screws. The whole machine is stable and cannot be floated. 2. Tighten the mounting screws of the wire rack and not float to avoid resonance. 3. Check the external power supply. For the 380V power supply, check whether the neutral wire is in place and the ground wire is grounded.

Basic knowledge of computer embroidery machine installation, debugging and maintenance

(Summary description)1. After the embroidery machine is in place, adjust the basic level, and fix and implement the four foot screws. The whole machine is stable and cannot be floated.

2. Tighten the mounting screws of the wire rack and not float to avoid resonance.

3. Check the external power supply. For the 380V power supply, check whether the neutral wire is in place and the ground wire is grounded.

Information
1. After the embroidery machine is in place, adjust the basic level, and fix and implement the four foot screws. The whole machine is stable and cannot be floated.
 
2. Tighten the mounting screws of the wire rack and not float to avoid resonance.
 
3. Check the external power supply. For the 380V power supply, check whether the neutral wire is in place and the ground wire is grounded.
 
4. Before starting the test run, remove all the debris on the table, check whether the embroidery confirmation light is on, whether the color-changing confirmation light (two) is on, whether the thread trimming and hooking proximity switch lights are on, and the parking position light (100° ) Is on. Clean the garbage during transportation, refuel, and use a special socket wrench to rotate the main shaft without jamming. Start debugging only after everything is normal.
 
5. For machine maintenance, dust, sand, thread ends and other garbage should be cleaned frequently. No debris should be placed on the table. The mechanical transmission part should be lubricated on time according to the regulations. The oil should be separated from the engine oil and the mechanical transmission part, and the white oil is added to the rotary hook and the machine. Thread parts, silicone oil and embroidery thread.
 
6. The working environment is best closed, keep the specified temperature and humidity, dust-proof and wind-proof. The electric fan cannot be used to prevent the embroidery thread from being blown up.
 
7. When loading and unloading the bottom thread, the bobbin should rotate clockwise in the bobbin case. When the bobbin is taken out from the bobbin case, the bobbin case cannot be knocked on the bed or hard ground to prevent the bobbin case from being deformed and causing the bottom thread to go out unsmoothly.
 
8. Refueling method: Do not refuel too much at a time to prevent contamination of the embroidery. It is best to use a special oiler to refuel, and wipe the surface with oil cloth for rust prevention.

More information

Computerized embroidery machine, including a body, a working part, a power box, an embroidery arm and an embroidery frame; the body is provided with a support plate, a vertical rod, a splitter frame, a splitter board, a computer stand and a tablet computer; Embroidery thread channels and needles;
Including the fuselage, the working part, the power box, the embroidery arm and the embroidery frame, the fuselage is provided with a support plate, a vertical rod, a threading frame, a threading board, a computer stand and a tablet computer, and the working part is provided with an embroidery thread channel and Needle; the embroidery frame includes a pair of embroidery rollers that rotate synchronously under the drive of a servo motor, and a retaining ring is installed on the embroidery rollers.
The bean stitch is a stitch that goes back and forth in the other chosen direction, and then a stitch goes over itself directly back to its starting point. The more needles, the stronger the three-dimensional effect. In the design, they are often connected together to form various patterns to create various embroidery effects.
Best computerized embroidery machine has liquid crystal display function: the liquid crystal display of this type of machine is generally of relatively high resolution, and the status of the pattern can be displayed on it at any time during embroidery, and it can be switched according to the actual situation. The English interface is very simple to operate.

Copyright© 2021  CHINA BAOLUN  All rights reserved   粤ICP备20022022号    Powered by www.300.cn

Copyright© 2021  CHINA BAOLUN All rights reserved

粤ICP备20022022号    Powered by www.300.cn

搜索
Search